HDAT2 - Bad Sectors Repairing Tool 1 comment

HDAT2 is program for test or diagnostics of ATA/ATAPI/SATA, SSD and SCSI/USB devices. It will not execute in a DOS session under Windows. You should make a DOS boot floppy disk or CD/DVD and boot your system for it and execute this program from that floppy disk or CD-ROM.

HDAT2 program has 2 levels:

• Device testing:
  Main function is testing and repair (to regenerate) bad sectors for detected devices - you get much information about detected devices
• File system testing:
  Read/find/check items (MBR, boot, directories, etc.) of file system FAT12/16/32 - check/remove (regenerates) bad sectors records, flags in FAT table

Features:

• Fully implemented commands: SET MAX, SET SECURITY, Device Configuration Overlay (DCO)
• Device access with interrupt 13h, direct via ATA ports, with ASPI drivers
• Detects ATA/ATAPI/SATA devices with on-board and add-on controllers
• Detects devices on AHCI/RAID controllers (just only on ports 0-3)
• Detects USB devices via USB ASPI driver or BIOS (if supported)
• Detects SCSI hard drives via BIOS interrupt 13h or ASPI drivers
• Tests and repair device for bad sectors (so far version 4.5.3 only)
• Resize hard drives which supports SET MAX ADDRESS/EXT
  (supports 28/48-bits LBA addressing modes)
• Drive lock detection via security feature (Security Menu)
• S.M.A.R.T. functions for ATA/SATA and SCSI drives only
• Information about devices (ATA/ATAPI, BIOS interrupt 13h, ASPI, EDD)
• Sector viewer for devices (also for USB, ZIP, CD-data discs)
• Enable/disable some features for direct-access devices

Note: Do Not Use Any Tutorial Of This Blog To Harm Anyone. This Is Only For Educational Purpose. I Will Not Be Responsible For Anything Done By You.

Size: 4.6 MB

Do you my like Articles..?

Get Free Email Updates Daily!	Follow us!